| |
| In
a layperson’s nutshell, our M-60 Xd features an advanced
technology that corrects phase and frequency errors in the “time
domain” -i.e. realtime - and provides up to 300 dB per
octave crossover slopes making the M-60 Xd the most accurate
mix/mastering monitor on this planet and several others. But
because this explanation admittedly falls well short of the
M-60 Xd’s true brilliance, we’d like to leave you
with one final thought: nothing will do your voodoo like this
do. Translation: Hear everything you’ve never heard before.
Dig deeper or just take our word for it. |
| M-60
xd Specifications |
|
| System
Type: |
DSP corrected/powered
near/midfield recording/mastering |
| Configuration:
|
2-way acoustic
suspension design |
| Woofer:
|
6.5"
magnesium cone, super linear motor |
| Tweeter:
|
1”
aluminum dome, ferro-fluid cooled, textile surround |
| Magnetic
Shielding: |
Full |
| Loudspeaker
Dimensions: |
15”
x 13” x 10” |
| Weight: |
17.5 lbs. |
| Loudspeaker
Enclosure Materials: |
Machined
MDF of various thicknesses |
| Amplifier
Power: |
150W RMS
x 4, 300W x 4 peak |
| Peak Acoustic
Output: |
112dB SPL(100ms
pink noise at 1M) |
| Residual
acoustic noise: |
<15dB
SPL@1M |
| System
THD @90dB SPL: |
<0.3%
(100Hz-20kHz @1M) |
| Frequency
Response: |
55Hz-20kHz
+/-0.5dB , -6dB LF cutoff:40Hz |
| Amplifier/DSP
processor dimensions: |
3.5"
x 19" x 13.375" |
| Amplifier/DSP
processor weight: |
12.5 lbs |
| Accessories:
|
S80Xd subwoofer |
| Output
to Subwoofer: |
XLR, RCA |
| Output
to Monitor: |
Quad banana
plug |
| Controls: |
Ch. 1 and
Ch. 2 4-position filter setting, Stereo/mono subwoofer switch |
| Display:
|
Standby/Power/Fault
|
| |
| What
does a dual 12", 500 watt, amplified sub sound like when
it displaces enough air to snuff out all 20 candles on a birthday
cake from the opposite side of a room? Good question. One that
deserves a thoughtful answer. So here’s ours (we spent
days searching for the right words): The S-80 sounds big. Really
big. Really, really big. Friggen’ unreal big. Just so
darn big. Way low, way clean, way big. Seismic sort of big.
The soul mate for your M-60 Xd or M-80 Xd rigs. |
| M-0
xd Specifications |
|
| System
Type: |
Integrated,
self-powered, subwoofer |
| Configuration:
|
Acoustic
Suspension Subwoofer |
| Woofer:
|
Two 12"
aluminum (not magnetically shielded) |
| Amplifier
Power: |
500W, 700W
peak |
| Peak Acoustic
Output @ 1M: |
117dB SPL
@ 40Hz |
| Residual
Hum/Noise: |
<5 dB
SPL |
| THD @ 90dB
SPL: |
<0.4%
above 50Hz |
| ±2dB
Response: |
21Hz -
80Hz |
| -6dB Cutoff:
|
17Hz |
| Input Connectors: |
XLR |
| Monitor
Size/Weight: |
25.8"
H x 12.6" W x 15.35" D / 76 lbs |
| Monitor
Material: |
MDF |
| Controls:
|
Level |
| Indicators: |
Power,
Standby, Fault |
| Amplifier/DSP
processor size/weight: |
3.5"
x 19" x 13.375" / 12.5 lbs |
| Accessories:
|
S80Xd subwoofer |
| Output
to Subwoofer: |
XLR, RCA |
| Output
to Monitor: |
Quad banana
plug |
| Controls: |
Ch. 1 and
Ch. 2 4-position filter setting, Stereo/mono subwoofer switch |
| Display:
|
Standby/Power/Fault |
| Note:
|
The S-80
Xd woofer requires the use of the XdA Digital Integrated Amplifier. |
| |
|
|
|
|
