|
|
RADAR®
ACCESSORIES
|
 |
| METER
BRIDGES
METERBRIDGE 24
The Meterbridge 24 mounts on the Session Controller
and provides 24 channels of metering and track status
information. Turn off the monitor and enjoy the
vibe!
METERBRIDGE 48
The choice for RADARLINK™ systems. 48 channels
of metering spanning the entire width of the Session
Controller. 48, 96 and 192 kHz systems can share
the same meterbridge and controller. Create your
own monster multitrack system!
Meterbridge 24 and 48 will work with both RADAR®
I and II systems. Both will fasten to the RE-8II
(RADAR® II remote), however the meter bridges
will not fasten to the RE-8 (RADAR® I).
The Meterbridges feature a 20 segment LED level
indicator with clip light. At the bottom of the
level indicator are 4 function indicators which
include Arm, Input, Solo and Edit. Communication
with the Session Controller is provided by a DB9
9pin connector. Clip hold time and peak hold time
are variable from infinity or 1 to 999 seconds.
|
|
|
METERBRIDGE
24 |
METERBRIDGE
48 |
| Dimensions:
|
| Width:
|
12
inches, 30 cm. |
| Height: |
5
inches, 12.5 cm |
| Depth:
|
¾
inch, 1.9 cm |
| Weight:
|
3
lbs, 1.3 kg |
|
| Dimensions:
|
| Width:
|
19
¼ inches, 48 cm. |
| Height: |
5
inches, 12.5 cm |
| Depth:
|
¾
inch, 1.9 cm |
| Weight:
|
5
lbs, 2.3 kg |
|
>> Back To Top
UFC-24
FORMAT CONVERTER |
|
|
Any supported digital input signal is available
through all outputs. Multiple UFC-24s can be linked
for transfers of more than 24 tracks. LED status
indicators display all parameters and lock state
of the source signal. |
>> Back To Top
RADAR®
SOUND
DIGITAL I/O
|
ADAT
Digital I/O
The new ADAT lightpipe interface card provides 24
channels of digital I/O using 6 TOSlink optical
connectors (3 in, 3 out.) Convenient status LED's
indicate current sync source and presence of valid
input signal. |
|
|
TDIF Digital I/O
The TASCAM Digital Interface Format or TDIF interface
card uses 3 female DB25 connectors to provide 24
channels of bi-directional, 24-bit digital I/O at
sample rates up to 48 kHz. |
| AES
Digital I/O
The AES/EBU interface card offers true professional
performance at sample rates up to 192 kHz using
RADAR® 24's dual or quad wire modes. 3 DB25
connectors provide up to 24 channels of 24-bit digital
I/O. |
|
ANALOGUE
I/O
|
|
CLASSIC
ANALOG I/O
The 44.1/ 48 kHz analog I/O that made RADAR®
famous! Experience the platinum sound so many producers,
artists and engineers have raved about. 24 channels
of balanced, line level audio I/O on 6, DB25 connectors.
Compatible with TASCAM DA-88 cabling. |
| NYQUIST
ANALOG I/O
The new standard for 96 kHz recording! Stunning
audio performance at all sample rates! 24 channels
of balanced, line level audio I/O on 6, DB25 connectors.
Compatible with TASCAM DA-88 cabling.
|
|
|
S-NYQUIST ANALOG I/O
The ultimate sound quality courtesy of our industry
leading 192 kHz AD/DA conversion technology. 24
channels of balanced, line level audio I/O on 6,
DB25 connectors. Compatible with TASCAM DA-88 cabling. |
>> Back To Top
|
|
CABLES
/LOOMS
Stirling Audio offers a comprehensive range of cables
and looms for iZ RADAR including XLR, TRS and Bantom |
>> Back To Top
DRIVES
Stirling Audio offers a range of hard & back updrives
giving a huge capicity of over 6 hours of 24 track
recording at 44.1 kHz. |
|
>> Back To Top
SESSION
CONTROLLER STAND
Adjustable, professional rolling stand for the Session
Controller. |
|
|
|
|
|
