 |
Audix
Condenser Microphones
|
| Micro-D
Condenser Microphone Overview
|
|
| Features |
| • |
Excellent
for both recording and live applications |
| • |
Miniaturized
integrated preamplifier |
| • |
No
additional external power adapter needed |
| • |
Mini-XLR
connector |
| • |
12
mm gold vapor diaphragm |
| • |
Fully
balanced for long cable runs (up to 150’) |
| • |
Extremely
low noise |
| • |
Hi-SPL
handling (over 144 dB with M1244) |
| • |
Lightweight |
| Applications |
| • |
Acoustic
instruments |
| • |
Ambient
room miking |
| • |
Symphonic area miking |
| • |
Overhead
mic for choir, group vocal |
|
|
Model
M1244 is Hi-SPL model for close miking
drums and other instruments with high sound
pressure levels. |
|
M1290
for stereo miking |
|
| M1245
on conga |
|
| MicroBoom™
Carbon Fiber Boom System |
The
MicroBoom™ is a 50-inch (1270 mm) carbon fiber
rod that can be utilized with any of the condenser
microphones in the Micros series. The MicroBoom™,
which is ultra lightweight and able to attach to any
microphone stand, is a problem solver for many hard-to-reach
miking applications including choir, plays, and orchestra.
Used in conjuction with the specially designed low
profile pedestal stand (Audix part number MB-STAND),
the MicroBoom™ can be used in the vertical position
for awards-style presentations.
The MicroBoom™ can used with a choice of seven
capsules in the Micros series, offering a broad choice
of pick-up pattern and frequency response. The top
of the MicroBoom™ features a mini-XLR connector
which securely holds the microphone in place and also
allows for easy access when changing out microphones.
High quality shielded cable is used internally to
insure the cleanest audio signal path between the
microphone and the bottom of the boom, which terminates
in a mini-XLR male connector.
The stand adapter designed for the MicroBoom™
allows for total control over the angle, rotation,
and position of the carbon fiber rod. A metal thumbscrew
locks the rod firmly in place. The final angle and
position of the microphone is controlled by using
the flexible metal gooseneck just below the microphone.
The Micros are designed with a fully integrated low
noise preamplifier within the barrel of the microphone
housing, effectively eliminating the need for an external
power supply. The elimination of the power supply
along with the ability to “hide” the cable
within the guides provided in the metal stand adapter
makes for an ultra-clean, professional, and elegant
appearance.
Click here for the full Microboom spec |
|
| Specifications |
| M1244
/ M1245 |
| Transducer
Type |
Condenser |
|
Frequency Response |
80
Hz - 20 kHz |
| Polar
Pattern |
Cardioid |
(M1245-hc) |
Hypercardioid |
|
Output Impedance |
250
Ohms |
| Sensitivity |
(M1244)
4 mV/Pascal @ 1k
(M1245) 14 mV/Pascal @ 1k |
| Equivalent
Noise Level |
19
dBA |
| Signal
to Noise Ratio |
75
db |
|
Power Requirements |
48-52v
phantom |
| Maximum
SPL |
(M1244)
> 144 dB
(M1245) > 138 dB |
| Cable/Connector
|
Shielded
12’ mini XLR–XLR |
| Housing
|
Machined
Brass |
| Weight |
.6
oz/17 grams |
| Length |
1.7 inches/45mm |
|
| M1290 |
| Transducer
Type |
Condenser |
|
Frequency Response |
40
Hz - 20 kHz |
| Polar
Pattern |
Cardioid |
| (M1290-hc) |
Hypercardioid |
| (M1290-o) |
Omni |
|
Output Impedance |
250
Ohms |
| Sensitivity |
14
mV/Pascal @ 1k |
| Equivalent
Noise Level |
19
dBA |
| Signal
to Noise Ratio |
75
db |
|
Power Requirements |
48-52v
phantom |
| Maximum
SPL |
>
138 dB |
| Cable/Connector
|
Shielded
12’ mini XLR–XLR |
| Housing
|
Machined
Brass |
| Weight |
1
oz/28 grams |
| Length |
3.5
inches/90mm |
|
| Supplied
Accessories |
| • |
12’
high quality 3.3mm cable with mini-XLR (f) –XLR
(m) connectors (CBL-M12) |
| • |
Mic
stand adapter (MC-MICRO) |
| • |
Rosewood
case |
| Optional
Accessories |
| • |
CBL-M2525’
high quality 3.3mm cable with mini-XLR (f) –XLR
(m) |
| • |
CBL-M50
50’ high quality 3.3mm cable with mini-XLR (f)
–XLR (m) |
| • |
HANGER-MICROClip
with hanger for overhead use |
| • |
SMT-
MICRO Stand adapter with rubber insulated
shockmount |
| • |
Dclamp-Micro
Lug mount attachment with shock mount ring.Applications
include hand percussion instruments. |
| • |
Dvice-Micro
Drum rim mount attachment with shock mount ring. |
| • |
MGN-6Slim
line 6-inch Podium gooseneck stand for Micros. Standard
XLR(m)base to mini-XLR(f). For use with all Micros
models. Allows Micros to bestored or used for multiple
applications. |
| • |
MGN-12
As above in 12-inch length |
| • |
MGN-18
As above in 18-inch length |
|
|
|
|
